Flat Washer Dimensions: 1/2
NAS1401 816 alum radius to NAS620 816 alum reduced
Military-preferred flat washer dimensional data per MIL-STD-1764 Sections 301-304 — OD, ID (min/max), and thickness for flat round and flat square/radius washers by nominal bolt/screw size (#0 through 3-inch), series (Narrow/Regular/Wide), material (Aluminum Alloy, Carbon Steel, CRES), and finish. Applicable documents: AN960, NAS620, MS9320, MS15795, MS16212, NAS1401. Used for bearing area, joint stack-up, and clearance calculations in aerospace and military hardware design.
| nominal size | record id | applicable document | finish | id max in (in) | id min in (in) | material | nominal size decimal in (in) | od in (in) | part number | series | standard | thickness in (in) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1/2 | NAS1401 816 alum radius | NAS1401 | Anodize | 0.536 | 0.505 | Aluminum Alloy | 0.5 | 1.062 | NAS1401-816 | Regular | MIL-STD-1764 Section 303-304 | 0.095 |
| 1/2 | NAS1401 B816 steel radius | NAS1401 | Cadmium Plate | 0.536 | 0.505 | Carbon Steel | 0.5 | 1.062 | NAS1401-B816 | Regular | MIL-STD-1764 Section 303-304 | 0.095 |
| 1/2 | NAS1401 C816 cres radius | NAS1401 | Passivate | 0.536 | 0.505 | CRES | 0.5 | 1.062 | NAS1401-C816 | Regular | MIL-STD-1764 Section 303-304 | 0.095 |
| 1/2 | NAS620 816 alum reduced | NAS620 | Anodize | 0.536 | 0.505 | Aluminum Alloy | 0.5 | 0.938 | NAS620-816 | Narrow | MIL-STD-1764 Section 301-304 | 0.063 |
What else is in Engineering Database
AI built for engineering. Searches the engineering database, performs calculations, gives source-backed engineering insights.
Get started for free ↗Reference Data375 engineering tablesMaterial properties, pipe and shape dimensions, code tables, and electrical ratings across mechanical, civil, chemical, electrical, materials, and manufacturing engineering.
Browse dataCalculatorsDeterministic engineering calculatorsSizing, checking, and conversion tools that run against the reference tables. Inputs are code-compliant, outputs are traceable to the source standard.
Browse calculators